Bibliothèque de modèles maritimes
Listes de contrôle et procédures pour les opérations, les équipages et la prévention des pollutions. Les nouveaux modules spécialisés sont disponibles en anglais.
02 / Modèles de bord
Choisir une routine
100 / 100 · Modèles de bord
Revue du périmètre du navire
Déterminer le profil réel avant de choisir les exigences.
- Identifier pavillon, type, dimensions, jauge, usage, personnes et zone.
- Distinguer les sources légales, les codes, la classe et les contrats.
Constat de préparation au départ
Consigner les observations selon la procédure approuvée du capitaine.
- Identifier voyage, navire, capitaine et procédure.
- Consigner les observations relevant de votre compétence.
Familiarisation et relève
Transmettre les responsabilités et les travaux non résolus.
- Identifier la fonction entrante ou sortante et l’heure.
- Référencer les instructions de sécurité et d’urgence à jour.
Inspection courante du navire
Relier lieux, constats et suivi.
- Définir zones, équipements et périmètre selon le SGS.
- Consigner l’état réellement observé et l’heure.
Exercice d’urgence et débriefing
Relier scénario, participation et enseignements.
- Référencer scénario, fréquence approuvée et coordinateur.
- Consigner heure, participants et fonctions.
Rapport d’incident et de presque-accident
Préserver les faits et la réponse immédiate.
- Identifier navire, lieu, heure et déclarant.
- Distinguer faits observés et hypothèses.
Vérification des actions correctives
Clôturer sur la base de preuves.
- Référencer constat initial, navire et priorité.
- Consigner responsable, échéance et mesures immédiates.
Revue des certificats et visites
Indexer les preuves sans délivrer d’approbation.
- Identifier la compagnie ou le navire et le document.
- Noter émetteur, périmètre, édition et référence authentique.
Réception des vivres et chaîne du froid
Relier livraisons et plan alimentaire approuvé.
- Identifier fournisseur, heure, produit et lot.
- Référencer critères, instrument et unités approuvés.
Inspection de la cuisine, des vivres et de l’eau
Appuyer la revue de bord sur des constats réels.
- Référencer navire, voyage, plan et responsable désigné.
- Consigner les observations sur stockage, préparation et matériel.
Déchets et prévention de la pollution
Relier les contrôles aux registres acceptés.
- Identifier plan applicable, flux et responsabilités.
- Observer tri, affichage et instruction de l’équipage.
Revue interne du SGS et index des preuves
Relier procédures, dossiers réels et amélioration.
- Définir périmètre compagnie/navire, réviseur et période.
- Référencer les procédures SGS et sources applicables.
Revue documentaire de la cargaison
Relier documents, décisions spécialisées et écarts ouverts.
- Identifier navire, voyage, cargaison et officier responsable.
- Référencer IMDG, IMSBC ou la procédure approuvée et l’édition applicable.
État de la cargaison et relève des opérations
Relier l’état observé aux responsables du bord et à terre.
- Identifier unité ou cale, lieu, heure et périmètre.
- Référencer la procédure approuvée et le réviseur compétent.
Hours of rest and fatigue review
Procédure disponible en anglaisMLC A2.3; STCW A-VIII/1. Daily and before watch assignment. Responsible: Master and watchkeeper.
- Identify each seafarer, watch, ship-local time offset and review window.
- Reconcile actual work, overtime, drills, call-outs and interrupted rest against the watch schedule; do not substitute planned hours.
Seafarer employment agreements
Procédure disponible en anglaisMLC A2.1. Before joining and on contract change. Responsible: Crewing manager.
- Verify shipowner identity and authorised signatory.
- Check signed agreement, review opportunity and seafarer copy.
Wages, accounts and allotments
Procédure disponible en anglaisMLC A2.2. Each pay cycle. Responsible: Payroll and crewing manager.
- Reconcile agreed basic pay, overtime and deductions.
- Check payment at no greater than monthly intervals under applicable provisions.
Recruitment and placement safeguards
Procédure disponible en anglaisMLC A1.4. Before agency appointment and joining. Responsible: Crewing manager.
- Verify agency licensing or applicable regulation.
- Check recruitment fees and permitted personal-document cost exceptions.
Minimum age and young seafarer protection
Procédure disponible en anglaisMLC A1.1. Before joining and task allocation. Responsible: Crewing manager and master.
- Verify age against reliable identity records.
- Check flag minimum age and under-18 restrictions.
Medical fitness certificates
Procédure disponible en anglaisMLC A1.2; STCW I/9. Before joining and before expiry. Responsible: Crewing manager and master.
- Verify issuing practitioner recognition and certificate identity.
- Check expiry, limitations and voyage coverage.
Leave, shore leave and repatriation
Procédure disponible en anglaisMLC A2.4–A2.5. At relief planning and repatriation trigger. Responsible: Crewing manager.
- Review accrued leave and service duration under flag and contract.
- Record shore-leave arrangements and documented restrictions.
Abandonment and shipowner liability security
Procédure disponible en anglaisMLC A2.5.2; A4.2. Before sailing and security renewal. Responsible: Shipowner representative.
- Check abandonment financial security certificate and provider.
- Check death or long-term disability contractual claim security.
Accommodation, recreation and welfare
Procédure disponible en anglaisMLC A3.1. At required onboard inspection interval. Responsible: Master and designated inspector.
- Identify construction-date and flag accommodation requirements.
- Inspect cabins, ventilation, lighting and sanitary spaces.
Onboard medical care and medical stores
Procédure disponible en anglaisMLC A4.1. At inventory interval and before departure. Responsible: Designated medical officer.
- Check medical chest against flag list and voyage needs.
- Verify qualified medical care or first-aid personnel.
Occupational health and safety committee
Procédure disponible en anglaisMLC A4.3; ISM 6–9. At risk review and committee interval. Responsible: Safety officer.
- Review task hazards and applicable exposure controls.
- Check PPE suitability, training and maintenance.
Confidential onboard complaints
Procédure disponible en anglaisMLC A5.1.5. On joining and when a complaint is received. Responsible: Designated complaints officer.
- Confirm crew have the onboard complaint procedure and external contacts.
- Explain representation and direct access to master or authorities.
MLC certificate, DMLC and inspection readiness
Procédure disponible en anglaisMLC A5.1.3–A5.1.4. Before inspection and at certificate milestones. Responsible: Master and shipowner representative.
- Determine certification scope and applicable flag implementation.
- Check Maritime Labour Certificate validity and inspection endorsements.
Violence, harassment and bullying prevention
Procédure disponible en anglaisMLC A4.3; STCW A-VI/1-4. On joining, training review and report. Responsible: Master and safeguarding contact.
- Check training against STCW changes effective 1 January 2026.
- Confirm reporting channels outside the alleged perpetrator's command chain.
STCW endorsements and safe manning
Procédure disponible en anglaisSTCW I/2, I/10; SOLAS V/14. Before sailing and crew change. Responsible: Master and crewing manager.
- Compare actual crew with minimum safe manning document.
- Verify certificates, flag endorsements, roles and expiry.
Competence, familiarisation and training matrix
Procédure disponible en anglaisSTCW I/14; SOLAS III/19. On joining and training review. Responsible: Master and training officer.
- Map each role to required basic and specialist competence.
- Check joining familiarisation before duties.
DPA access and master's overriding authority
Procédure disponible en anglaisISM 3–5. On SMS review and change of command. Responsible: Master and designated person ashore.
- Check shipowner responsibilities and shore reporting lines.
- Verify designated person availability and alternate contacts.
Risk assessment and management of change
Procédure disponible en anglaisISM 1.2, 7; operator SMS. Before non-routine work or operational change. Responsible: Master and department lead.
- Define change, affected systems and responsible approver.
- Identify hazards, simultaneous operations and affected people.
Planned maintenance and critical equipment
Procédure disponible en anglaisISM 10; SOLAS II-1. At planned interval and defect report. Responsible: Chief engineer.
- Identify critical equipment and maintenance intervals.
- Review overdue work and authorised deferrals.
SMS document control and records
Procédure disponible en anglaisISM 11. On revision and scheduled review. Responsible: DPA and document controller.
- Identify approved document owner and revision.
- Verify onboard and shore copies match.
SMS internal audit and management review
Procédure disponible en anglaisISM 12. At required audit and review intervals. Responsible: DPA and independent auditor.
- Define audit scope and auditor independence.
- Review ship and company audit due dates.
DOC and SMC certification cycle
Procédure disponible en anglaisISM 13–14; SOLAS IX. Before survey milestones and certification change. Responsible: DPA and master.
- Check company DOC ship-type scope and annual verification.
- Check vessel SMC and intermediate verification.
Emergency preparedness and shore exercises
Procédure disponible en anglaisISM 8; SOLAS III. At exercise interval and scenario change. Responsible: Master and emergency coordinator.
- Review credible vessel-specific emergencies.
- Check onboard and shore roles and contact trees.
Maritime cyber risk and recovery
Procédure disponible en anglaisISM; IMO MSC.428(98). At system change and exercise interval. Responsible: DPA and IT/OT lead.
- Inventory bridge, machinery and business systems.
- Review access, vendor connections and removable media controls.
Fire detection, suppression and escape routes
Procédure disponible en anglaisSOLAS II-2; FSS Code. At maintenance interval and before departure. Responsible: Safety officer and chief engineer.
- Check fire control plans and system inventory.
- Inspect detection, alarms and authorised test results.
Lifeboats, rafts and rescue equipment
Procédure disponible en anglaisSOLAS III; LSA Code; MSC.402(96). At required inspection and service intervals. Responsible: Safety officer.
- Check survival craft inventory and capacity.
- Inspect access, readiness and embarkation arrangements.
GMDSS and distress communication readiness
Procédure disponible en anglaisSOLAS IV. At required radio checks and before voyage. Responsible: Radio operator.
- Confirm sea-area radio requirements and operator qualifications.
- Review radio licences, identities and current publications.
Passage planning and navigation review
Procédure disponible en anglaisSOLAS V/34; COLREG. Before voyage and route change. Responsible: Master and navigating officer.
- Record appraisal using updated charts and publications.
- Review route, draught, under-keel clearance and tides.
Bridge watch handover and collision prevention
Procédure disponible en anglaisSOLAS V; COLREG 5–10, 19; STCW VIII. Every watch handover and visibility change. Responsible: Officer of the watch.
- Check lookout, visibility, traffic and vessel position.
- Review radar, AIS limitations and independent position checks.
Navigation equipment, charts and bridge records
Procédure disponible en anglaisSOLAS V/18–20, 27. Before voyage and planned checks. Responsible: Navigating officer.
- Check charts, ECDIS permits and correction status.
- Verify radar, GNSS, speed and depth instruments.
Steering gear checks and emergency steering drill
Procédure disponible en anglaisSOLAS V/26. At statutory test and drill intervals. Responsible: Master and chief engineer.
- Identify required pre-departure tests and applicable flag exceptions.
- Review main, auxiliary and remote steering checks.
Emergency generator and blackout recovery
Procédure disponible en anglaisSOLAS II-1. At planned test and drill intervals. Responsible: Chief engineer.
- Review emergency loads and approved test procedure.
- Check generator starting and fuel readiness.
Watertight integrity and stability readiness
Procédure disponible en anglaisSOLAS II-1; Load Lines. Before sailing and condition change. Responsible: Master and chief officer.
- Check approved stability information and loading instrument status.
- Review draughts, freeboard and load line conditions.
Enclosed space entry permit and rescue readiness
Procédure disponible en anglaisSOLAS XI-1/7; III/19; approved SMS. Before every entry and whenever conditions change. Responsible: Authorised entry supervisor.
- Identify the space, residues, adjacent hazards and entry purpose.
- Verify isolation, lockout and ventilation under the approved procedure.
Muster, abandon ship and fire drill record
Procédure disponible en anglaisSOLAS III/19, III/37. At applicable statutory drill intervals. Responsible: Master and safety officer.
- Check muster list, duties and working-language instructions.
- Review required frequency and joining-crew triggers.
Mooring, anchoring and towing readiness
Procédure disponible en anglaisSOLAS II-1/3-8; approved SMS. Before each operation and inspection interval. Responsible: Master and deck supervisor.
- Review mooring or towing plan and environmental limits.
- Check equipment inventory, line condition and inspection evidence.
Lifting appliances, loose gear and anchor-handling winches
Procédure disponible en anglaisSOLAS II-1/3-13; 2026 applicability. Before lift and statutory examination milestone. Responsible: Chief officer and competent lifting supervisor.
- Determine installation date and applicable survey transition.
- Verify appliance register, safe working load and examination certificates.
Lost container detection and reporting
Procédure disponible en anglaisSOLAS V/31–32; MARPOL Protocol I; 2026 amendments. On loss, sighting or updated information. Responsible: Master.
- Record actual or estimated position, UTC time and number of containers.
- Identify immediate navigational and pollution hazards.
ISPS access control and security watch
Procédure disponible en anglaisSOLAS XI-2; ISPS Part A. At port arrival and security-level change. Responsible: Ship security officer.
- Confirm current security level and port interface.
- Check identity, visitors and restricted-area control.
Declaration of Security and security exercises
Procédure disponible en anglaisISPS Part A 5, 13. At required interface and exercise triggers. Responsible: Ship and company security officers.
- Determine whether a Declaration of Security is required.
- Identify ship and port facility security contacts.
Annex I bilge, sludge and Oil Record Book review
Procédure disponible en anglaisMARPOL Annex I. Before transfer or disposal and record review. Responsible: Chief engineer.
- Identify tanks, quantities and authorised transfer route.
- Check oily-water equipment, alarms and service evidence.
Bunkering and oil spill prevention
Procédure disponible en anglaisMARPOL Annex I, VI; approved bunkering plan. Before, during and after each delivery. Responsible: Chief engineer and bunker supervisor.
- Confirm fuel specification, receiving capacity and tank plan.
- Agree supplier communications, rate and emergency stop.
SOPEP/SMPEP readiness and pollution response
Procédure disponible en anglaisMARPOL I/37; II/17. At exercise interval and before cargo or bunker transfer. Responsible: Master and pollution response lead.
- Check approved plan applicability and current contacts.
- Identify pollution response team and reporting routes.
Annex II noxious liquid substances and Cargo Record Book
Procédure disponible en anglaisMARPOL Annex II; IBC Code. Before cargo operation and tank cleaning. Responsible: Chief officer.
- Verify product identity and authorised carriage category.
- Review approved Procedures and Arrangements Manual.
Annex III harmful substances in packaged form
Procédure disponible en anglaisMARPOL Annex III; IMDG Code. Before accepting or loading packages. Responsible: Chief officer.
- Verify marine pollutant declaration and package identity.
- Check marks, labels and packaging condition.
Annex IV sewage treatment and discharge readiness
Procédure disponible en anglaisMARPOL Annex IV. Before discharge and planned equipment checks. Responsible: Chief engineer.
- Check sewage certificate and approved plant or holding arrangements.
- Review location, voyage and local restrictions.
Annex V garbage segregation and record review
Procédure disponible en anglaisMARPOL Annex V. At collection, disposal and record review. Responsible: Environmental officer.
- Check garbage plan, placards and applicability of record-book requirements.
- Verify segregation including plastics, food, cooking oil and operational waste.
Cargo residues, hold washing and washwater
Procédure disponible en anglaisMARPOL Annex V; IMSBC Code. Before hold cleaning and residue disposal. Responsible: Chief officer.
- Verify cargo environmental classification and shipper declaration.
- Identify residues, cleaning agents and washwater hazards.
Annex VI fuel sulphur and ECA changeover
Procédure disponible en anglaisMARPOL Annex VI/14, 18. Before ECA entry and fuel changeover. Responsible: Chief engineer.
- Review route and current emission control areas and implementation dates.
- Check fuel sulphur specification, bunker notes and samples.
NOx, ozone-depleting substances and incineration
Procédure disponible en anglaisMARPOL Annex VI/12, 13, 16. At equipment service and emission review. Responsible: Chief engineer.
- Check EIAPP certificates and NOx Technical Files.
- Review engine parameter records and modifications.
SEEMP, fuel data and CII review
Procédure disponible en anglaisMARPOL Annex VI; SEEMP, DCS, CII. At reporting cycle and operational change. Responsible: Shipowner energy manager.
- Determine tonnage, ship-type and reporting applicability.
- Check approved SEEMP parts and verification evidence.
Ballast water treatment and operations record
Procédure disponible en anglaisBWM Convention; approved BWMP. Before ballast uptake, treatment or discharge. Responsible: Chief officer.
- Check certificate and approved ballast water management plan.
- Review treatment equipment status, alarms and consumables.
Biofouling management and anti-fouling evidence
Procédure disponible en anglaisAFS Convention; IMO biofouling guidelines; local rules. Before drydock, cleaning and port-entry review. Responsible: Technical superintendent.
- Check anti-fouling certificate or declaration applicability.
- Review coatings, prohibited substances and service history.
Inventory of hazardous materials and ship recycling
Procédure disponible en anglaisHong Kong Convention; applicable regional rules. On equipment change and recycling planning. Responsible: Shipowner and technical superintendent.
- Check convention and regional applicability and inventory certification.
- Review IHM maintenance and supplier material declarations.
IMDG dangerous goods acceptance
Procédure disponible en anglaisSOLAS VII; IMDG 42-24. Before acceptance and stowage change. Responsible: Trained dangerous goods officer.
- Verify shipper declaration, UN number and proper shipping name.
- Check class, subsidiary risk, packing group and marine pollutant status.
IMSBC bulk cargo acceptance and liquefaction controls
Procédure disponible en anglaisSOLAS VI; IMSBC Code. Before loading and when cargo condition changes. Responsible: Master and chief officer.
- Verify bulk cargo shipping name and individual schedule.
- Review cargo group and shipper declaration.
Container VGM, stowage and securing
Procédure disponible en anglaisSOLAS VI/2, VI/5; approved Cargo Securing Manual. Before loading and sailing. Responsible: Chief officer.
- Match container identity and verified gross mass evidence.
- Check vessel loading-plan communication and cut-off.
Grain loading readiness
Procédure disponible en anglaisSOLAS VI; International Grain Code. Before grain loading and departure. Responsible: Master and chief officer.
- Check document of authorisation and approved grain loading manual.
- Identify cargo, hold preparation and trimming arrangements.
Oil tanker ship-shore transfer and inert gas
Procédure disponible en anglaisSOLAS II-2; MARPOL Annex I; approved cargo procedures. Before and during each transfer. Responsible: Chief officer and terminal representative.
- Agree cargo plan, rates, pressure and communications with terminal.
- Check moorings, access, ignition controls and spill readiness.
Chemical tanker cargo compatibility and transfer
Procédure disponible en anglaisIBC Code; MARPOL Annex II. Before chemical cargo acceptance and transfer. Responsible: Chief officer.
- Match cargo against certificate of fitness and product list.
- Review cargo hazards, compatibility and tank coating suitability.
Gas carrier containment and transfer readiness
Procédure disponible en anglaisIGC Code; approved cargo manual. Before cargo transfer and condition change. Responsible: Chief officer and gas engineer.
- Check certificate of fitness and approved cargo limits.
- Review containment pressure, temperature and relief arrangements.
Gas and low-flashpoint fuel bunkering
Procédure disponible en anglaisIGF Code; approved fuel procedures. Before each low-flashpoint fuel transfer. Responsible: Chief engineer and bunker supervisor.
- Check applicable fuel code, vessel approval and trained personnel.
- Review bunker compatibility, capacity and transfer plan.
Polar voyage and operational manual review
Procédure disponible en anglaisSOLAS XIV; Polar Code; MARPOL. Before polar voyage and ice-condition change. Responsible: Master and ice navigator.
- Check Polar Ship Certificate and current applicability including relevant non-SOLAS provisions.
- Review PWOM, ice limitations and environmental conditions.
Passenger accounting, muster and assistance
Procédure disponible en anglaisSOLAS III; STCW V/2. Before departure and passenger drills. Responsible: Master and passenger services lead.
- Reconcile passenger numbers and required identity information.
- Check muster instructions in suitable languages.
Ro-ro vehicle deck fire and securing controls
Procédure disponible en anglaisSOLAS II-2; applicable 2026 amendments. Before departure and during deck watch. Responsible: Chief officer and fire safety officer.
- Check vehicle deck hazards and prohibited activities.
- Review fire detection, patrol and video-monitoring applicability by ship date and type.
Industrial personnel and offshore transfer
Procédure disponible en anglaisSOLAS XV; IP Code; approved transfer procedures. Before each transfer. Responsible: Master and transfer supervisor.
- Determine IP Code and personnel-count applicability.
- Check certification, medical fitness and familiarisation.
High-speed and special-purpose vessel readiness
Procédure disponible en anglaisHSC Code or SPS Code as applicable. Before service and operating-area change. Responsible: Master and technical superintendent.
- Identify the applicable HSC or SPS regime and flag approval.
- Check certificates, operating permit and person categories.
Fishing vessel labour, rest and safety
Procédure disponible en anglaisILO C188; STCW-F; flag fishing-vessel rules. Before voyage and crew change. Responsible: Owner and skipper.
- Confirm fishing-vessel scope; MLC is not the default labour regime for fishing vessels.
- Check work agreements, age, fitness and recruitment.
Load Lines, tonnage and survey status
Procédure disponible en anglaisLoad Lines; Tonnage; flag survey rules. Before departure and survey milestones. Responsible: Master and superintendent.
- Verify load line and tonnage certificate particulars.
- Check endorsements and survey windows.
Port State Control preparation and deficiency closure
Procédure disponible en anglaisApplicable convention and port State procedures. Before port call and after inspection. Responsible: Master and superintendent.
- Identify port State requirements and inspection history.
- Index certificates, crew records and key operational evidence.
Flag, coastal State and port obligation register
Procédure disponible en anglaisFlag legislation; coastal State and port notices. Before trading-area, flag or vessel-use change. Responsible: DPA and master.
- Record flag, vessel use, length, tonnage, construction date and trading area.
- List ratifications, exemptions, equivalents and national implementation.
Workboat and domestic vessel SMS review
Procédure disponible en anglaisApplicable domestic vessel or workboat code. Before service and SMS review. Responsible: Owner and master.
- Identify actual flag, domestic code and operating certificate.
- Check vessel category, limits and persons carried.
Commercial yacht and charter readiness
Procédure disponible en anglaisApplicable yacht code; flag law; MLC scope. Before charter and change of use. Responsible: Master and yacht manager.
- Confirm private or commercial use and applicable yacht code.
- Review passenger limit, area, manning and certificate conditions.
Hot work permit and fire watch
Procédure disponible en anglaisApproved SMS; SOLAS II-2. Before each hot work task. Responsible: Authorised permit issuer.
- Define work location, scope and permit validity.
- Review combustible materials, adjacent spaces and cargo hazards.
Energy isolation and electrical work permit
Procédure disponible en anglaisApproved SMS; MLC A4.3. Before maintenance and isolation changes. Responsible: Chief engineer and authorised isolator.
- Identify electrical, hydraulic, pneumatic, thermal and stored energy.
- Record isolation points and lock or tag custody.
Work aloft and overside permit
Procédure disponible en anglaisApproved SMS; MLC A4.3. Before each task and condition change. Responsible: Deck supervisor.
- Identify work position, access and dropped-object hazards.
- Check isolation of radar, radio and moving equipment as applicable.
Diving and simultaneous operations interface
Procédure disponible en anglaisApproved diving plan; local commercial diving law. Before each diving operation. Responsible: Master and competent diving supervisor.
- Confirm jurisdiction, diving contractor competence and approved plan.
- Review propulsion, thruster, intake and discharge isolations.
Tender and small craft launch readiness
Procédure disponible en anglaisApproved tender manual; flag requirements. Before launch and passenger transfer. Responsible: Master and tender coxswain.
- Check craft capacity, equipment and operator competence.
- Review launch gear, lifting points and exclusion areas.
Engine room watch handover
Procédure disponible en anglaisSTCW VIII; approved SMS. Every watch handover. Responsible: Engineer of the watch.
- Review propulsion, generators and auxiliary status.
- Check tank levels, bilges and active transfers.
Stowaway, piracy and voyage security assessment
Procédure disponible en anglaisApproved ship security plan; voyage security guidance. Before high-risk transit and port departure. Responsible: Master and ship security officer.
- Review current route threats and coastal reporting arrangements.
- Check access and pre-departure search plan.
Maritime liability and insurance evidence
Procédure disponible en anglaisApplicable CLC, Bunkers, Nairobi Wreck Removal and flag rules. Before certificate renewal and trading change. Responsible: Shipowner and master.
- Determine vessel, tonnage, cargo and treaty applicability.
- Check P&I cover and applicable State-issued certificates.
Port arrival, health and ship reporting
Procédure disponible en anglaisFAL Convention; local port and health requirements. Before port arrival and departure. Responsible: Master and port agent.
- Check arrival reporting deadlines and maritime single window requirements.
- Reconcile crew, passenger, stores and cargo declarations.
Cargo fumigation and pesticide safety
Procédure disponible en anglaisSOLAS VI; cargo-specific guidance; approved SMS. Before fumigation and entry into affected spaces. Responsible: Master and chief officer.
- Identify fumigant, treated cargo and affected spaces.
- Check competent contractor plan and master briefing.
Galley HACCP, allergens and potable water controls
Procédure disponible en anglaisMLC A3.2; flag food and water rules. Each service and water-system control interval. Responsible: Chief cook and designated water officer.
- Review food hazards, allergens and crew dietary needs.
- Check receiving, storage, cooking, cooling and service evidence against approved limits.
Crew welfare, connectivity and shore access
Procédure disponible en anglaisMLC A3.1; A4.4; flag implementation. At welfare inspection and port planning. Responsible: Master and welfare representative.
- Review recreation, communications access and applicable cost arrangements.
- Check access to shore welfare information and support.
Maritime regulatory change and amendment register
Procédure disponible en anglaisISM 1.2, 11; IMO and ILO treaty status. At scheduled horizon review and official notice. Responsible: DPA and compliance manager.
- Record instrument, amendment, adoption and effective dates.
- Check flag acceptance, vessel scope and transition triggers.
Modèles opérationnels originaux, rapprochés des sources liées le 11 novembre 2026. À adapter avec un professionnel maritime compétent. Ils ne certifient pas la conformité et ne remplacent ni les manuels approuvés, ni les visites réglementaires, ni les registres acceptés.