← Maritime

THE MARITIME FIELD GUIDE / 01

Safe people.
Ready vessels.
Clear records.

Maritime safety management, from rulebook to routine. A practical guide to MLC, SOLAS, MARPOL, ISM and the work behind them.

A cargo vessel underway on open water
ON BOARD / ON RECORD

The rule sets the standard.
The routine makes it work.

THE REGULATORY MAP

Every discipline.
Its own operating picture.

Follow the work from crew welfare to pollution prevention. Each chapter connects the requirement to the routines on board.

BEYOND THE EVERYDAY / POLAR CODE

Different waters.
Different demands.

Plan for remote conditions, operating limits and the environment around the vessel.

Explore polar operations
A vessel navigating an Arctic fjord with scattered sea ice

Also covered: COLREG, Load Lines, IMDG, IMSBC, IBC, IGC, IGF, BWM, AFS, ship recycling, passenger ships, fishing and local applicability.

Explore all 100 workflows

BEFORE THE FIRST CHECK

Start with the vessel, not a universal checklist. Establish which flag, voyage, ship-type and tonnage rules apply. Turn each applicable obligation into a controlled procedure, a named responsibility and a record of what actually happened.

Two vessels in the same marina can operate under very different obligations. Flag, commercial use, construction date, length, gross tonnage, persons carried, cargo and voyage area all matter. International conventions sit alongside flag implementation, coastal State rules, port requirements and certificate conditions.

Begin with an applicability register. Give each requirement an official source, an effective date, an owner and a review trigger. Keep exemptions and equivalents with the authority that issued them. A checklist helps execute a requirement; it cannot establish that every legal obligation has been identified.

THE PRACTICAL CHECK

  • Identify the vessel and operating profile.
  • Confirm applicable instruments and national implementation.
  • Link the approved procedure, responsible role and required record.
  • Review the register when the vessel, trade, equipment or rules change.
Flag and domestic SMS requirements

A safety management system should connect policy to daily decisions. The ISM Code addresses responsibilities, resources, safe operations, emergency preparedness, incident reporting, maintenance, controlled documents and verification. The designated person ashore connects shipboard concerns to the people who can supply resources.

Separate the company’s Document of Compliance from the vessel’s Safety Management Certificate. Track their scope, verification windows and outstanding conditions independently. A record of a drill or inspection supports the SMS; it does not renew either certificate.

THE PRACTICAL CHECK

  • Make the master’s overriding authority and escalation route clear.
  • Control procedure revisions and remove obsolete instructions.
  • Track critical equipment, defects and deferred maintenance.
  • Use independent audits and management review to verify effectiveness.
ISM: company and vessel togetherFrom finding to verified improvement
03 / THE PEOPLE / MLC

Life on board matters.

The conditions people live and work in belong in the same operating picture as the condition of the vessel.

Off-duty seafarers taking a quiet break in a ship’s mess room

MLC: decent work is part of vessel readiness

The Maritime Labour Convention covers much more than catering. Depending on its application and flag implementation, the operating picture includes recruitment, age, medical fitness, employment agreements, wages, leave, repatriation, accommodation, food and water, medical care, occupational safety, social protection and complaints.

Check what people experience on board against the agreement and the record. A signed document does not resolve unpaid wages, a missing repatriation arrangement or an inaccessible complaint channel. Keep personal, payroll and medical information in restricted records; routine shared inspections should reference those records without reproducing sensitive details.

For ships subject to MLC certification, connect the Maritime Labour Certificate and Declaration of Maritime Labour Compliance to the shipowner’s actual measures. Confirm flag acceptance and commencement dates: the 2025 MLC amendments are expected to enter into force on 23 December 2027, rather than already being mandatory internationally.

THE PRACTICAL CHECK

  • Review joining documents, recruitment safeguards and medical fitness.
  • Reconcile pay, leave, relief and financial security.
  • Inspect accommodation, welfare, food, water and medical readiness.
  • Provide confidential complaints and protection from retaliation.
Galley and provisioning records

The watch schedule describes an intention. Rest-hour review needs actual work, interrupted rest, drills, call-outs and overtime. Review rolling windows and the applicable flag regime, then assess whether a person is fit for the duty ahead. Passing a numerical check does not prove that someone is alert.

MLC allows national implementation through work-hour limits or rest-hour minimums; STCW requirements also apply to relevant watchkeeping and designated duties. The standard rest baseline is at least 10 hours in any 24 hours and 77 hours in any seven days. Check the applicable rules for division of rest, intervals, permitted exceptions and compensatory rest. Do not treat the MLC work-hour alternative as permission to ignore applicable STCW rest rules.

Where the standard division applies, rest is split into no more than two periods, one at least six hours, and the interval between consecutive rest periods does not exceed 14 hours. Emergency work and lawful exceptions require their own evidence and follow-up. Routine understaffing is not a reason to silently rewrite the record.

STANDARD REST BASELINE / CHECK THE APPLICABLE REGIME

10hoursin any 24 hours

77hoursin any seven days

Also review the division of rest, intervals, interruptions, lawful exceptions and compensatory rest. The applicable flag implementation and STCW requirements control.

THE PRACTICAL CHECK

  • Reconcile actual work against posted arrangements.
  • Review rolling 24-hour and seven-day windows.
  • Record interruptions, lawful exceptions and compensatory rest.
  • Relieve an unfit watchkeeper and address the workload or manning cause.
05 / THE VESSEL / SOLAS

Readiness is a daily practice.

Trace the safety barrier from its certificate to its physical condition, and from its procedure to the people who use it.

An enclosed orange lifeboat secured at its station on a merchant vessel

SOLAS: keep the safety barriers ready

SOLAS spans construction and machinery, fire protection, lifesaving appliances, radio communications, navigation, cargo carriage and additional ship-specific requirements. Use equipment-specific inspections and service evidence instead of one general “vessel safe” answer.

Connect each barrier to a practical routine: fire detection and escape routes; survival craft and launching appliances; GMDSS and reserve power; steering and emergency power; watertight integrity; navigation equipment and passage planning. Apply the actual statutory and manufacturer intervals to the vessel.

A drill should reveal whether people can perform their roles safely. Record attendance, what was attempted, equipment limitations and the changes needed. Do not manufacture a successful drill record for a drill that was not performed.

THE PRACTICAL CHECK

  • Check certificate and service status against physical condition.
  • Identify impaired equipment and authorised operational restrictions.
  • Brief the people who depend on the affected safety barrier.
  • Verify repairs and safe restoration before closing the defect.
Evidence that survives a handover
06 / THE ENVIRONMENT / MARPOL

Protect the sea around you.

Six annexes. Distinct pollution streams. The right controls and the right record for each operation.

Bunker manifold, hose connections and containment on a merchant ship deck

MARPOL: separate the six pollution streams

MARPOL is not a single waste checklist. Annex I addresses oil; Annex II noxious liquid substances in bulk; Annex III harmful substances in packaged form; Annex IV sewage; Annex V garbage; and Annex VI air pollution. Each stream has its own applicability, equipment, operations and records.

Build routines for bilge and sludge, bunkering and spill response, cargo residues, sewage treatment, garbage segregation, fuel quality and emission control area changeovers. For applicable ships, add energy-efficiency planning and reporting. Location, special areas, cargo characteristics and local restrictions can change what is permitted.

Keep statutory record books and required receipts in the accepted form. A Kivloo supporting checklist can capture observations and point to an entry; it is not automatically an approved Oil, Cargo, Garbage or Ballast Water Record Book.

MARPOL / THE SIX ANNEXES

The six MARPOL annexes and their pollution streams
AnnexPollution stream
IOil
IINoxious liquid substances in bulk
IIIHarmful substances in packaged form
IVSewage
VGarbage
VIAir pollution

THE PRACTICAL CHECK

  • Identify the material and applicable annex before disposal or transfer.
  • Verify the approved equipment and operational conditions.
  • Retain actual quantities, positions, times and reception evidence.
  • Reconcile supporting observations with the accepted statutory records.
MARPOL: routines and accepted records

Packaged dangerous goods, solid bulk cargoes, grain, oil, chemicals and liquefied gases create different hazards. Use the applicable IMDG, IMSBC, Grain, IBC or IGC requirements and approved cargo procedures. A general cargo handover does not resolve dangerous goods classification, moisture risks or compatibility.

Specialist operations add further layers: gas or low-flashpoint fuel systems, polar voyages, passenger ships, ro-ro spaces, industrial personnel transfers, high-speed craft and special-purpose vessels. Fishing vessel labour and training need their own scope review, including C188 and STCW-F where applicable.

For dangerous goods, the IMDG Code incorporating amendment 42-24 became mandatory on 1 January 2026. Keep the controlled code and supplements current, and verify later amendments against their effective dates before changing the procedure.

THE PRACTICAL CHECK

  • Hold cargo with unresolved identity, declaration or condition discrepancies.
  • Confirm authorised carriage and specialist competence.
  • Link approved stability, stowage, securing and transfer decisions.
  • Record stop conditions and the competent acceptance decision.
Cargo operations: documents, condition and handover
08 / SPECIALIST OPERATIONS / POLAR CODE

The operating environment changes everything.

Remote waters demand a vessel-specific plan for operating limits, people, equipment and recovery.

An ice-capable vessel navigating open water between Arctic sea ice and glaciated mountains

Polar Code: plan for the place you are going

Polar operations deserve their own operating picture. The Polar Code addresses safety and environmental protection in polar waters, with applicability determined through the relevant SOLAS and MARPOL provisions and flag implementation. Check the vessel’s certification, limitations and intended voyage rather than assuming that every ship in cold water has the same obligations.

For the applicable vessel, connect the Polar Ship Certificate and Polar Water Operational Manual to the actual route, ice and weather information, crew competence, communications, survival equipment and rescue assumptions. Confirm the limits of the ship and the people before committing to a remote operating area.

Pollution prevention belongs in that same plan. Review applicable polar restrictions, fuel and waste arrangements and reception options. Record changes to the voyage and the competent decision when conditions move outside the planned operating envelope.

THE PRACTICAL CHECK

  • Confirm the vessel’s polar scope, certification and approved operating limits.
  • Review ice, weather, route, safe havens and emergency support.
  • Verify required competence, equipment and survival arrangements.
  • Record environmental restrictions and the decision to proceed, change route or stop.
09 / PROTECT THE OPERATION / ISPS & CYBER

Know who. Know what. Control access.

Security is an operating discipline: people, physical access, connected systems and a plan for disruption.

A ship security officer checking access at an illuminated gangway at dusk

Security, cyber risk and safe systems of work

Safety depends on controlled access, reliable systems and disciplined work authorisation. Apply ISPS requirements through the approved ship security plan where relevant. Keep sensitive security arrangements and incident details in restricted records.

Treat cyber risk as an operational concern: bridge and machinery systems, vendor access, backups, recovery and safe fallback arrangements belong in the SMS. A list of installed software is not a tested recovery plan.

Use task-specific permits for enclosed spaces, hot work, energy isolation, work aloft and overside activities. Confirm competence, isolation, monitoring, communications and rescue arrangements before work begins. A completed digital form does not make an unsafe atmosphere or uncontrolled energy source safe.

THE PRACTICAL CHECK

  • Confirm the authorised issuer, worksite and permit validity.
  • Verify critical controls using actual observations and measurements.
  • Stop when conditions change or a required control is lost.
  • Account for people and restore systems only with authorisation.

A useful SOP gives the crew a sequence they can follow under real operating conditions. Define when it applies, who can authorise the work, what must be ready, the actions to perform, the conditions that stop the job and the evidence needed to close it.

Keep the instruction separate from the observation. “Check the alarm” is an instruction; the device tested, actual time, result and defect reference are evidence. Leave blank fields blank until work is performed. Never prefill a good result to make a record look complete.

THE PRACTICAL CHECK

  • Scope and trigger: the vessel, operation and applicable requirement.
  • Owner and preparation: competence, equipment and prerequisites.
  • Execution and stop rules: the sequence and escalation decision.
  • Record and verification: actual evidence, action owner and authorised close-out.

A defect is not closed because someone assigned a due date. Record the immediate response, operational restriction, accountable owner, correction and the evidence that demonstrates the control now works. Where the flag, class, RO or port State must be involved, retain that decision.

Make evidence retrievable by vessel, event, procedure version and responsible role. Preserve completed records and corrections with a traceable history. For serious or repeated findings, investigate the system cause: resources, competence, planning or a procedure that does not fit the work.

THE PRACTICAL CHECK

  • Observe and record the actual condition.
  • Contain the risk and notify the right person.
  • Correct the cause and retain evidence.
  • Verify effectiveness, then authorise closure.
From finding to verified improvement

A USEFUL RECORD CLOSES THE LOOP

  1. 01Observe

    What actually happened?

  2. 02Respond

    What controls the risk now?

  3. 03Assign

    Who owns the next action?

  4. 04Verify

    What proves it is resolved?

An international checklist library cannot replace an operator’s maintained legal register. Treat the workflows here as starting points for competent adaptation. Establish flag and port applicability, add vessel-specific criteria, and set the actual inspection or operating interval before use.

Review amendments as a change-management task. Record adoption and entry-into-force dates separately, determine which vessels and installations are affected, and update training, equipment, SOPs and evidence requirements together. Use official treaty status and flag notices to resolve the implementation date.

THE PRACTICAL CHECK

  • Use the 100-workflow catalog to identify relevant routines.
  • Keep approved procedures and statutory records as the controlling references.
  • Assign source monitoring and translation review to named owners.
  • Recheck after changes to vessel, trade, equipment, personnel or regulation.

FROM READING TO ROUTINE

Take the next check
on board.

Choose a workflow. Adapt it to your vessel. Keep the procedure, the observation and the next action connected.

Explore the maritime library
A harbour workboat underway

COMMON QUESTIONS

Before you get started.

Does every maritime rule apply to every vessel?

No. Flag, vessel type, commercial use, size, construction date, voyage and cargo affect applicability. Domestic vessels, yachts, fishing vessels and international cargo ships can operate under different regimes. Confirm the actual legal scope with a competent reviewer.

What is the minimum rest requirement?

For the applicable standard rest regime, the baseline is 10 hours in any 24 hours and 77 hours in any seven days. Also check division of rest, intervals, permitted exceptions and compensatory rest under flag implementation and STCW where relevant. Review actual work and fitness for duty.

Do these forms replace statutory books or certificates?

No. These original operational starters support observations, actions and evidence retrieval. Use the required approved or accepted record books, certificates, manuals and regulatory processes.

Are the new workflows translated?

The original 14 routines have eight language editions. The 86 additional specialist workflows are currently in English and are labelled accordingly. Review terminology and vessel-specific instructions before crew use.

How do I start using a checklist?

Choose a workflow, review its scope and sources, download the blank CSV or SOP, or open a private draft in Kivloo. Adapt it to the approved vessel procedure and save it in the appropriate workspace.

Put the guidance to work