# Fire safety & emergency readiness

Connect the site emergency plan to route checks, staff briefings, drill observations and follow-up.

Source review: 2026-10-27

Operational starters in English. References identify their own jurisdiction. Select the rules that apply to your site, adapt the documents, and obtain competent approval before use.

## Use the plan for this building

Identify the responsible roles, occupancy, shared areas and evacuation arrangements for the actual premises. The official England and Wales guidance describes responsible-person duties and notes different rules in Scotland and Northern Ireland. This pack is a readiness record to use alongside the competent fire risk assessment and site emergency plan.

## Keep routine observations separate from specialist work

Record whether designated routes are accessible and whether obvious obstructions or defects need escalation. Reference alarm, lighting or equipment service records where relevant. A visual walkaround does not establish that a system has been tested, maintained or certified. Use the competent service process for that work.

## Brief the people who will need the plan

Explain the site procedure to staff and coordinate with other occupiers. Include arrangements for visitors and people who may need assistance, handled through the approved plan. During a planned drill, observe how the plan worked and record improvements. Do not publish sensitive personal assistance details in a general checklist.

## Track the unresolved defect

Assign each finding to an owner and record any restriction or temporary measure approved by the responsible person. Verify completion through the relevant check or specialist evidence. Revisit readiness when building use, layout, occupancy or the emergency arrangements change.

## SOP starter: Emergency readiness walkaround and drill review

Status: DRAFT — complete site-specific details and obtain approval before use.

Site: __________
Owner: __________
Version: __________
Approved by / date: __________
Next review / trigger: __________

### Preparation

- Reference the approved fire risk assessment and emergency plan.

- Identify the responsible person, coordinator, shared-premises contacts and escalation route.

- Set the approved observation and drill schedule; identify checks needing competent specialists.

### Procedure

1. Observe designated escape routes and record obstructions or visible defects.

2. Confirm staff can locate the emergency instructions and relevant contacts.

3. Reference scheduled system checks or service records without marking unperformed work complete.

4. During a planned drill, follow the approved plan and record observations.

5. Escalate defects, assign actions and record authorised interim measures.

6. Verify follow-up and brief affected people on any change.

### Records

- Readiness observations

- Drill and briefing record

- Specialist service references and defect follow-up

### Review triggers

- Layout or occupancy change

- Drill finding or incident

- Defective emergency equipment or route

## Editable templates

- [Fire and emergency readiness record](https://kivloo.com/template-library/fire-emergency-readiness)

- [Site induction and practical follow-up record](https://kivloo.com/template-library/site-induction-record)

- [Corrective action register](https://kivloo.com/template-library/corrective-action-register)

## Official references

- [GOV.UK: fire safety responsibilities](https://www.gov.uk/workplace-fire-safety-your-responsibilities) — England and Wales; separate rules elsewhere; Official guidance

Canonical: https://kivloo.com/template-library/packs/fire-emergency