# Cargo condition and operations handover

Connect observed cargo condition to the responsible ship and shore roles.

2026-11-11 · v1 · en

## Before you begin

Choose the vessel, confirm applicability and use the operator-approved procedure. Set the actual criteria and frequency with the responsible reviewer.

Start with the flag, vessel type, gross tonnage, commercial use, persons carried and voyage area. Confirm the applicable rules and approved procedure before using a starter. Language does not determine jurisdiction.

## What to record

1. Identify cargo unit or hold, location, event time and inspection scope.

2. Reference the approved condition, loading or discharge procedure and competent reviewer.

3. Record visible condition, identification, seals or temperature evidence where required.

4. Describe discrepancies and supporting photographs without inferring unperformed tests.

5. Record notification, authorised restrictions, next owner and required response.

6. Preserve the handover and verification evidence; do not use this record for stability or securing calculations.

## Follow-up and review

Escalate urgent defects under the vessel procedure. Record authorised restrictions, an accountable owner and verification evidence before closing.

## Official starting points

- [IMO · IMDG Code](https://www.imo.org/en/publications/pages/imdg%20code.aspx)

- [IMO · IMSBC Code](https://www.imo.org/en/ourwork/safety/pages/cargoesinbulk-default.aspx)

- [IMO · SOLAS](https://www.imo.org/en/about/conventions/pages/international-convention-for-the-safety-of-life-at-sea-%28solas%29%2C-1974.aspx)

Original operational starters, checked against the linked sources on 13 November 2026. Adapt with a competent maritime reviewer. They do not certify compliance or replace approved manuals, statutory surveys or accepted record books.